Powerglide Cases / Bells / Tails

Showing all 26 results

Sort By
Show per page

Case Vent

Case Vent

MOROSO FABRICATED ALUMINUM DEEP PAN

MOROSO FABRICATED ALUMINUM DEEP PAN

Powerglide (SB & BB Chevy) Ultra Bellhousing W/SFI CERT. 30.1

Powerglide (SB & BB Chevy) Ultra Bellhousing W/SFI CERT. 30.1

Powerglide Heavy Duty Cast Aluminum Pan

Powerglide Heavy Duty Cast Aluminum Pan. This deep aluminum pan gives your powerglide transmission extra fluid capacity and greater cooling.…

Powerglide Standard Length Stock Tail Housing

Powerglide Standard Length Stock Tail Housing Tail housings are cleaned and inspected for cracks or defects. New Bronze bushing and…

Powerglide Stock Case (Cleaned and Inspected)

Powerglide Stock Case (Cleaned and Inspected)

Powerglide Stock Case with Stock Bellhousing Removed

ATF cleans and inspects select cores before machining them for race duty. Using the precision of our CNC machining centers…

Powerglide Ultra Bell housing (BB Chrysler) W/SFI CERT. 30.1

Powerglide Ultra Bell housing (BB Chrysler) W/SFI CERT. 30.1

Powerglide Ultra Bell housing (BB Ford) W/SFI CERT.30.1

Powerglide Ultra Bell housing (BB Ford) W/SFI CERT.30.1

Powerglide Ultra Bell housing (SB Chrysler) W/SFI CERT. 30.1

Powerglide Ultra Bell housing (SB Chrysler) W/SFI CERT. 30.1

Powerglide Ultra Bellhousing 4.6 / 5.4Mod Motor W/SFI CERT. 30.1

Powerglide Ultra Bell housing (4.6 & 5.4Mod Motor) W/SFI CERT. 30.1

Powerglide Ultra Bellhousing SB Ford 164 tooth W/SFI CERT. 30.1

Powerglide Ultra Bell housing (SB Ford 164 Tooth Flywheel) W/SFI CERT. 30.1

Powerglide Ultra Case

Powerglide Ultra Case SFI Approved

Powerglide Ultra Standard Length Tail Housing (Rollerized)

Powerglide Ultra Standard Length Tail Housing (Rollerized)

REID 1 Piece Superglide Transmission Case with Steel Liner SFI Approved

REID 1 Piece Superglide Transmission Case with Steel LINER Retains both 30.1 and 4.1 SFI certifications

$1,040.63

REID BIG BLOCK FORD BELLHOUSING

Big Block Ford bellhousing for the Reid Racing 2-piece Superglide and Super Hydra 400® case fits 429 and 460 Fords. Cast…

REID BIG BLOCK MOPAR BELLHOUSING

Big Block Mopar bellhousing for the Reid Racing 2-piece Superglide and Super Hydra 400® case fits 361-383-400-413-426-440 B and RB…

REID BUICK, OLDS, PONTIAC BELLHOUSING

Buick/Olds/Pontiac bellhousing for the Reid Racing 2-piece Superglide and Super Hydra 400® is not a dual-pattern bell, which allows for…

REID CHEVROLET BELLHOUSING

Chevrolet bellhousing for the Reid Racing 2-piece Superglide and Super Hydra 400® case fits all 90 degree V8's and the 4.3…

REID EXTENSION HOUSING W/BEARING (REQUIRES SPECIAL YOKE MO5-39035)

REID EXTENSION HOUSING W/BEARING (REQUIRES SPECIAL YOKE MO5-39035)

REID MODULAR FORD MOTOR BELLHOUSING

Modular Ford bellhousing for the Reid Racing 2-piece Superglide and Super Hydra 400® case fits 4.6, 5.4, and 6.8 liter…

REID Powerglide Bellhousing for 2JZ Conversion

ATF's 2JZ Powerglide Bellhousing is specially modified and CNC machined to fit the Toyota 2JZ engine. Fits the Reid Powerglide…

REID Powerglide Bellhousing for 2JZ Conversion

ATF's 2JZ Powerglide Bellhousing is specially modified and CNC machined to fit the Toyota 2JZ engine. Fits the Reid Powerglide…

REID RACING MODULAR TRANSMISSION CASE, SFI APPROVED (BELL HOUSING SOLD SEPERATELY)

REID RACING MODULAR TRANSMISSION CASE, SFI APPROVED (BELL HOUSING SOLD SEPERATELY)

REID SMALL BLOCK FORD BELLHOUSING

Small block Ford bellhousing for the Reid Racing 2-piece Superglide and Super Hydra 400® case fits 1966 and later 289-302-351C-351W-5.0L…

REID SMALL BLOCK MOPAR AND GEN3 HEMI BELLHOUSING

With dual starter pockets, the Reid Racing Small Block Mopar bellhousing for the 2-piece Superglide and Super Hydra 400® case…